Magnavox MME100 User manual, English (US) - Page 19

English Clock/Timer 5 Press TIMER again. ➜ The clock digits for the minutes flash. 6 Press VOLUME 3 / 4 to set the minutes. 7 Press TIMER to confirm the time. ➜ The timer is now set and activated. Activating and deactivating TIMER ● In standby or during playback, press TIMER once. ➜ Display shows TIMER if activated, and disappears if deactivated. Setting the clock 1 In standby, press CLOCK. ➜ The clock digits for the hours flash. 2 Press VOLUME 3 / 4 to set the hours. 3 Press CLOCK again. ➜ The clock digits for the minutes flash. 4 Press VOLUME 3 / 4 to set the minutes. 5 Press CLOCK to confirm the time. Setting the timer ● The system can be used as an alarm clock, whereby the CD or TUNER is switched on at a set time.The clock time needs to be set first before the timer can be used. ● During setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. 1 In any mode, press TIMER for more than 2 seconds. 2 Press VOLUME 3 / 4 (or press SOURCE) to select sound source. 3 Press TIMER to confirm your desired mode. ➜ The selected source CD or TUNER is shown. The clock digits for the hours flash. 4 Press VOLUME 3 / 4 to set the hours. Activating and deactivating SLEEP The sleep timer enables the system to switch off by itself after a set period of time.The clock time needs to be set first before the sleep timer can be used. ● Press SLEEP on the remote control once or more. ➜ Display shows SLEEP and one of the sleep time options in sequence: 60, 45, 30,15, SLEEP OFF, 60... if you have selected a time. Once SLEEP is activated, SLEEP ON scrolls across the display at repeated intervals. ● To deactivate, press SLEEP on the remote control once or more until SLEEP OFF is shown, or press STANDBY-ON on the system or remote control. ➜ SLEEP OFF scrolls across the display. 19