Makita 3707FC Owners Manual - Page 12
Maintenance
View all Makita 3707FC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
001713 Trimmer guide Trimming, curved cuts in veneers for furniture and the like can be done easily with the trimmer guide. The guide roller rides the curve and assures a fine cut. 001714 Install the trimmer guide on the tool base with the clamp screw (A). Loosen the clamp screw (B) and adjust the dis- 1 4 tance between the bit and the trimmer guide by turning the 2 adjusting screw (1 mm (3/64") per turn). At the desired dis- tance, tighten the clamp screw (B) to secure the trimmer guide in place. 3 1. Adjusting screw 2. Clamp screw (B) 3. Trimmer guide 4. Clamp screw (A) 001715 When cutting, move the tool with the guide roller riding the side of the workpiece. 2 1 3 1. Workpiece 2. Bit 3. Trimmer guide MAINTENANCE CAUTION: • Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. 12