Makita 3707FC Owners Manual - Page 9
Straight guide optional accessory - replacement base
View all Makita 3707FC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
001704 Loosen the screws and remove the base protector. Place the 2 templet guide on the base and replace the base protector. 3 Then secure the base protector by tightening the screws. 1 1 1. Screws 2. Base protector 3. Screwdriver 3 1 4 2 5 7 1. Base 2. Templet 3. Straight bit 4. Templet guide 10 5. Distance (X) 6. Workpiece 7. 10 mm (3/8") 001705 Secure the templet to the workpiece. Place the tool on the templet and move the tool with the templet guide sliding along the side of the templet. NOTE: The workpiece will be cut a slightly different size from the 6 templet. Allow for the distance (X) between the router bit and the outside of the templet guide. The distance (X) can be calculated by using the following equation: Distance (X) = (outside diameter of the templet guide - router bit diameter) / 2 001706 Straight guide (optional accessory) The straight guide is effectively used for straight cuts when chamfering or grooving. 9