Makita DFJ304ZL DFJ304 DFJ405 Instruction Manual - Page 7

4 1 5 1 2 3 ► 1 . Fan unit 2. Ring 3. Hook 4. Slot 5. Mark 2. Pass the head of the fan unit into the hole on the jacket. Set the ring onto the fan unit and turn it clockwise until the mark on the ring aligns with the mark further from the slot. 1 ► 1 . Strip 4. Attach the other fan unit to the jacket in the same way. 5. Connect the cable to the fan units. Support the cable using the cable holder. 1 2 ► 1 . Cable 2. Cable holder 6. Connect the other end of the cable to the battery holder. 2 1 3 ► 1 . Mark 2. Ring 3. Fan unit 3. Pass the strip through the loop on the fan unit and fasten the snap button. ► 1 . Battery holder CAUTION: Always use the strip and snap button to secure the fan unit to the jacket. If the fan unit falls, it may cause an injury, or damage to the fan unit. Follow the installation procedure in reverse when removing it. 7 ENGLISH