Makita DFJ304ZL DFJ304 DFJ405 Instruction Manual - Page 9

Indicator lamps Remaining capacity Lighted Off Blinking 75% to 100% 50% to 75% 25% to 50% 0% to 25% (For 14.4 V and 18 V batteries only) Charge the battery. The battery may have malfunctioned. Air flow To maintain a stable air flow, close the button at the neck of the jacket. Fasten the button on the ribbon for better air flow in the back. 1 (For 14.4 V and 18 V batteries only) NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. Battery protection system The device is equipped with a battery protection system. This system automatically cuts off power to the motor to extend battery life. If the remaining battery capacity is too low, the device will not operate. When you turn the device on, the motor will run again, but stops soon. In this situation, remove and recharge the battery cartridge. Turbo button By pressing turbo button on the battery holder, the jacket works in turbo mode for quick cooling. Turbo mode lasts for a minute and then air speed returns to normal. 1 ► 1 . Ribbon Air flow inside the jacket is shown below. For a jacket with a hood, wear the hood over a helmet. The air from the fan goes through the helmet and cools your head. ► 1 . Turbo button 9 ENGLISH