Makita GA7082 Instruction Manual - Page 11
Installing wire cup brush, Installing wire wheel brush
View all Makita GA7082 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
For United States and Canada ø45 1 ø78 2 3 ø78 4 Installing wire wheel brush Optional accessory CAUTION: Do not use wire wheel brush that is damaged, or which is out of balance. Use of damaged wire wheel brush could increase potential for injury from contact with broken wires. CAUTION: ALWAYS use guard with wire wheel brushes, assuring diameter of wheel fits inside guard. Wheel can shatter during use and guard helps to reduce chances of personal injury. 1 5 Fig.17 ► 1 . Lock nut 2. Outer flange 78 3. Abrasive cut-off wheel / diamond wheel 4. Inner flange 78 5. Wheel guard for abrasive cut-off wheel / diamond wheel Installing wire cup brush Optional accessory CAUTION: Do not use brush that is damaged, or which is out of balance. Use of damaged brush could increase potential for injury from contact with broken brush wires. 1 2 Fig.19 ► 1 . Wire wheel brush Remove any accessories on spindle. Thread wire wheel brush onto spindle and tighten with the wrench. Installing dust collecting wheel guard Dust collecting wheel guard for grinding (for model GA7080 / GA7081 / GA9080 / GA9081) 1 3 2 4 Fig.18 ► 1 . Wire cup brush 2. Urethane washer (included depending on the country) Unplug tool and place it upside down allowing easy access to spindle. Remove any accessories on spindle. Thread wire cup brush onto spindle and tighten with the wrench. 5 6 Fig.20 ► 1 . Lock nut 2. Cup-type diamond wheel 3. Hubbed cup-type diamond wheel 4. Inner flange 5. Dust collecting wheel guard 6. Bearing box WARNING: Dust collecting wheel guard for grinding is only for use in grinding flat concrete with a cup-type diamond wheel. Do not use it with grinding stones or for any purpose other than mentioned. 11 ENGLISH