Makita GA9080 Instruction Manual - Page 6
Functional, Description
View all Makita GA9080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
15. Pay attention that the wheel continues to rotate after the tool is switched off. 16. If working place is extremely hot and humid, or badly polluted by conductive dust, use a short-circuit breaker (30 mA) to assure operator safety. 17. Do not use the tool on any materials containing asbestos. 18. When use cut-off wheel, always work with the dust collecting wheel guard required by domestic regulation. 19. Cutting discs must not be subjected to any lateral pressure. 20. Do not use cloth work gloves during operation. Fibers from cloth gloves may enter the tool, which causes tool breakage. 21. Make sure there are no electrical cables, water pipes, gas pipes etc. that could cause a hazard if damaged by use of the tool. SAVE THESE INSTRUCTIONS. WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. Symbols The followings show the symbols used for tool. volts amperes hertz alternating current rated speed Class II Construction FUNCTIONAL DESCRIPTION CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Shaft lock Press the shaft lock to prevent spindle rotation when installing or removing accessories. 1 Fig.1 ► 1 . Shaft lock NOTICE: Never actuate the shaft lock when the spindle is moving. The tool may be damaged. Switch handle mounting positions Only for model GA7080 / GA9080 CAUTION: Always make sure that the switch handle is locked in the desired position before operation. The switch handle can be rotated to either 90° left or right to fit your work needs. First, unplug the tool. Press the lock button and rotate the switch handle to left or right fully. The switch handle will be locked in that position. revolutions or reciprocation per minute diameter 3 1 2 Fig.2 ► 1 . Motor housing 2. Lock button 3. Handle 6 ENGLISH