Makita HR4013C Owners Manual - Page 10
Optional Accessories - sds
View all Makita HR4013C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
1. Hammer grease OPTIONAL ACCESSORIES 1 014041 Wipe out the old grease inside and replace with fresh grease: For model HR4003C, HR4013C: 30g For model HR5202C, HR5212C: 60g Use only Makita genuine hammer grease (optional accessory). Filling with more than the specified amount of grease can cause faulty hammering action or tool failure. Fill only with the specified amount of grease. Reinstall all removed parts. 1. Connector 1 014042 Attach the connector and reinstall the handle. NOTE: Note that the different lengths of screws are used. NOTICE • Do not tighten the crank cap excessively. It is made of resin and is subject to breakage. • Be careful not to damage the connector or lead wires especially when wiping out the old grease or installing the handle. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. • SDS-MAX Carbide-tipped bits • SDS-MAX bull point • SDS-MAX cold chisel • SDS-MAX scaling chisel • SDS-MAX clay spade • Hammer grease • Bit grease • Side handle • Side grip • Depth gauge • Blow-out bulb • Safety goggles • Carrying case • Dust extractor attachment NOTE: • Some items in the list may be included in the tool package as standard accessories. They may differ from country to country. 10