Makita LXDT01Z Owners Manual - Page 5
Switch action, Electric brake, Lighting up the front lamp, Reversing switch action
View all Makita LXDT01Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Switch action 1. Switch trigger 1 009208 CAUTION: • Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. NOTE: • Continuing to pull the trigger switch for more than 130 seconds will stop the tool. Electric brake This tool is equipped with an electric brake. If the tool consistently fails to quickly stop after switch trigger release, have tool serviced at a Makita service center. Lighting up the front lamp CAUTION: • Do not look in the light or see the source of light directly. 1. Lamp 1 009209 1. Light button SH ON to the OFF and from the OFF to the ON. With the light button in the ON status, pull the switch trigger to turn on the light. To turn off, release it and the light goes out approximately 10 seconds after releasing. With the light button in the OFF status, even if the trigger is pulled, the lamp will not light on. NOTE: • To make sure the status of light, pull the trigger. When the lamp lights up by pulling the switch trigger, the light switch is in the ON status. When the lamp does not come on, the light switch is in the OFF status. • During the operation of switch trigger, the light status cannot be changed. • For approximately 10 seconds after releasing the switch trigger, the light status can be switched. Reversing switch action 1. Reversing switch lever A B 1 009211 This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation. When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled. CAUTION: • Always check the direction of rotation before operation. • Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. • When not operating the tool, always set the reversing switch lever to the neutral position. 1 011216 Every time the light button on the switch panel is pressed, the light status is alternatively changed from the 5