Makita MP001GZ01 Instruction Manual - Page 10

Using the tapered adapter CAUTION: Be careful not to inflate the floating tube too much. To inflate floating tubes, use the tapered adapter. 1. Attach the tapered adapter to the air chuck. 1 2 3. Turn on the tool. 4. Inflate the tire by pulling the switch trigger while checking the status of the tire. NOTICE: When using the English valve adapter, the pressure gauge will not display an accurate value due to characteristics of the valve. When inflating a tire, do not use the value on the pressure gauge, but inflate it by checking the status of the tire. If the tool stops before the tire reaches the desired air pressure, adjust the pressure value, and then inflate the tire again. MAINTENANCE ► 1 . Air chuck 2. Tapered adapter 2. Insert the tapered adapter into the hole on the floating tube. 3. Turn on the tool. 4. Inflate the floating tube by pulling the switch trigger while checking the status of the floating tube. NOTICE: When inflating a floating tube, do not refer to the current pressure value on the pressure gauge. The pressure gauge does not display an accurate current pressure value when the pressure of floating tube is less than 35 kPa (5 PSI). Using the English valve adapter Country specific NOTICE: Be sure to select the low speed mode when you inflate an object using an English valve adapter. If other mode is selected, the inflation cannot be performed properly. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. MAKITA LIMITED WARRANTY Please refer to the annexed warranty sheet for the most current warranty terms applicable to this product. If annexed warranty sheet is not available, refer to the warranty details set forth at below website for your respective country. United States of America: www.makitatools.com Canada: www.makita.ca Other countries: www.makita.com 1. Insert the English valve adapter into the air chuck. 2. Attach the English valve adapter to the valve stem while opening the English valve adapter. 1 2 OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. 3 ► 1 . English valve adapter 2. Air chuck 3. Valve stem If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. • Makita genuine battery and charger NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from country to country. 10 ENGLISH