Makita MP001GZ01 Instruction Manual - Page 9
Operation
View all Makita MP001GZ01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
OPERATION NOTE: The standard adapters vary depending on the country. Using the Schrader valve adapter 1. Attach the air chuck to the valve stem. 2. Attach the Presta valve adapter to the valve stem, and then attach the air chuck to the Presta valve adapter. 1 3 1 2 2 ► 1 . Valve stem 2. Air chuck 2. Turn on the tool, and then set the pressure value appropriate for the tire using the pressure gauge. 3. Keep pulling the switch trigger until the tool stops. The tire is inflated with the specified pressure. Using the Presta valve adapter 1. Loosen the locking nut on the valve stem. 1 ► 1 . Presta valve adapter 2. Valve stem 3. Air chuck 3. Turn on the tool, and then set the pressure value appropriate for the tire using the pressure gauge. 4. Keep pulling the switch trigger until the tool stops. The tire is inflated with the specified pressure. 5. Remove the air chuck and Presta valve adapter, and then tighten the locking nut. Using the sport ball needle NOTICE: Be sure to select the ball mode when you inflate a ball using a sport ball needle. If other mode is selected, the inflation cannot be performed properly. To inflate sport balls, use the sport ball needle. 1. Attach the sport ball needle to the air chuck. ► 1 . Locking nut 1 2 ► 1 . Air chuck 2. Sport ball needle 2. Insert the sport ball needle into the hole on the ball. 3. Turn on the tool. 4. Set the inflation mode to the ball mode, and set the pressure value appropriate for the ball using the pressure gauge. 5. Keep pulling the switch trigger until the tool stops. The ball is inflated with the specified pressure. 9 ENGLISH