Makita SK106GDZ SK106 Instruction Manual - Page 6

Instrument Set-up Laser receiver To be able to detect the laser lines over long distances or in unfavourable lighting conditions, a laser receiver can be used. We recommend the Makita LDX1 laser receiver. Li-Ion battery Installing or removing battery cartridge CAUTION Always switch off the tool before installing or removing of the battery cartridge. CAUTION Hold the tool and the battery cartridge firmly when installing or removing battery cartridge. Failure to hold the tool and the battery cartridge firmly may cause them to slip off your hands and result in damage to the tool and battery cartridge and a personal injury. To remove the battery cartridge, slide it from the tool while sliding the button (1) on the front of the cartridge. To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click. If you can see the red indicator (2) on the upper side of the button, it is not locked completely. CAUTION Always install the battery cartridge fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. CAUTION Do not install the battery cartridge forcibly. If the cartridge does not slide in easily, it is not being inserted correctly. CAUTION Connecting the wrong adapter may cause serious damage to the instrument. Any damage caused by misuse is not covered by warranty. Use only Makita approved batteries USB adapters and cables. Unapproved can damage the instrument. Makita SK106D/SK106GD 6