Makita VC4210L VC4210L Instruction Manual - Page 18
Activate Auto-On/Off operation - for sale
View all Makita VC4210L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
D GB F NL I N S DK SF E P GR TR SLO HR SK CZ PL H RO BG RUS EST LV LT AL MK SR UK Makita VC4210L Turn I: Activate the machine Turn : Stop the machine. Permanent power on socket Turn AUTO : Activate Auto-On/Off operation Turn I + : Activate the machine with deactivated automatic filter cleaning function Turn AUTO + : Activate Auto- On/Off operation with deactivated automatic filter cleaning function Suction power control operation on separate turning knob 3.2 Auto-On/Off socket outlet for power tools CAUTION Appliance socket. The appliance socket is designed for electrical auxiliary equipment; see technical data for reference. 1. Prior to plugging in an appliance, always switch off the machine and the appliance that is to be connected. 2. Read the operating instructions to the appliance to be connected and observe the safety notes contained in these. An appliance socket with earthing contact is integrated in the machine. An external power tool can be connected there. The socket features permanent power on, when the electrical switch is in position , i.e. the machine can be used as an extension cord. In position AUTO the machine can be switched on and off by the power tool connected. Dirt is picked up from the source of dust immediately. To comply with regulations, only approved dust producing tools should be connected. The maximum power consumption of the connected electrical appliance is stated in section "Specifications". Before turning the switch to position AUTO ensure that the tool connected to the appliance socket is switched off. cle will automatically run during operation to ensure that suction performance is always at its best. If suction performance decreases or in extensive dust applications a manually filter cleaning operation is recommended: 1. Switch off the machine. 2. Close the nozzles or suction hose opening with the palm of your hand. 3. Turn the switch to position „I" and let the ma- chine operate at full speed for approx. 10 seconds with the suction hose opening closed. If suction power is still reduced take out the filter and clean mechanically or replace filter. For certain applications, like wet pick up, it is recommended to turn off the automatic filter cleaning system. For details see chapter 3.1. 3.4 Antistatic connection*) CAUTION The machine is equipped with an antistatic system to discharge any static electricity that may develop during dust pick-up. The antistatic system is placed in front part of the motor top and creates an earth ground connection to the inlet fitting of the container. For proper function the use of an electrical conductive or antistatic suction hose is recommended. 1. When inserting the optional disposal bag make sure the antistatic connection is kept. 3.5 Cooling air filter To protect the electronics and motor, the machine is equipped with a cooling air diffusor. Clean the cooling air diffusor regularly. For areas with a high concentration of fine dust in the surrounding air it is recommended to equip the machine with an optional cooling air filter cartridge to prevent dust from settling inside the air channels and motor. Contact your local sales representative. CAUTION If cooling air filter is clogged by dust the overload protection switch in the motor can be activated. 1. In such case switch off the machine, clean cooling air filter and allow machine to cool for approx. 5 minutes. 3.3 AutoClean The machine is equipped with an automatic filter cleaning system, AutoClean. A frequent cleaning cy- 16 *) Optional accessories / Option depending on model Original instruction