Makita VC4210L VC4210L Instruction Manual - Page 20

D GB F NL I N S DK SF E P GR TR SLO HR SK CZ PL H RO BG RUS EST LV LT AL MK SR UK Makita VC4210L Remove the electrical plug from the socket before installing the adapter plate. CAUTION*) Do not lift machine in adapter plate without having storage case safely installed. Note the weight and balance of the appliance in case of storage. Maximum weight of storage cases is 30 kg. 4.5 Recycling the machine Make the old machine unusable. 1. Unplug the machine. 2. Cut the power cord. 3. Do not discard of electrical appliances with household waste. As specified in European Directive 2012/19/EU on old electrical and electronic appliances, used electrical goods must be collected sepa- rately and recycled ecologically. 5 Maintenance 5.1 Regular servicing and inspection Regular servicing and inspection of your machine must be carried out by suitably qualified personnel in accordance with relevant legislation and regulations. In particular, electrical tests for earth continuity, insulation resistance, and condition of the flexible cord should be checked frequently. In the event of any defect, the machine MUST be withdrawn from service, completely checked and repaired by an authorized service technician. At least once a year, a Makita technician or an instructed person must perform a technical inspection including filters, air tightness and control mechanisms. • Clean the maintenance area so that no harmful substances get into the surroundings During maintenance and repair work all contaminated parts that could not be cleaned satisfactorily must be: • Packed in well sealed bags • Disposed of in a manner that complies with valid regulations for such waste removal. For details of after sales service contact your dealer or Makita service representative responsible for your country. See reverse of this document. 6 Further information 6.1 EC Declaration of conformity We hereby declare that the machine described below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval. Product: Wet and dry vacuum cleaner Type: VC4210L Relevant EU Directives: 2006/42/EC, 2014/30/EU, 2011/65/EU Applied harmonized standards: EN 60335-1:2012+A11:2014 EN 60335-2-69:2012 EN 55014-1:2006+A1:2009+A2:2011 EN 55014-2:2015 EN 61000-3-2:2014 EN 61000-3-3:2013 EN 50581:2012 Authorised Documentation Representative: Makita Europe N.V., Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium 5.2 Maintenance Remove the plug from the socket before performing maintenance. Before using the machine make sure that the frequency and voltage shown on the rating plate correspond with the mains voltage. The machine is designed for continuous heavy work. Depending on the number of running hours - the dust filter should be renewed. Keep the machine clean with a dry cloth, and a small amount of spray polish. During maintenance and cleaning, handle the machine in such a manner that there is no danger for maintenance staff or other persons. In the maintenance area: • Use filtered compulsory ventilation • Wear protective clothing 18 26.06.2019 Hiroshi Tsujimura Director - Makita Europe N.V. Makita Europe N.V., Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium *) Optional accessories / Option depending on model Original instruction