Makita XCU06Z XCU06T Instruction Manual - Page 14
Operation
View all Makita XCU06Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
5. Tighten the retaining nut to secure the sprocket cover. 1 ► 1 . Retaining nut Make sure the saw chain fits snugly against the lower side of the bar. Spike bumper Optional accessory When cutting thick branches, using the spike bumper is recommended. To install the spike bumper, perform the following steps: 1. Remove the sprocket cover, saw chain, and guide bar. 2. Align the holes of the spike bumper with the holes on the chain saw body, and then tighten the screws firmly. OPERATION Lubrication Saw chain is automatically lubricated when the tool is in operation. Check the amount of remaining oil in the oil tank periodically through the oil inspection window. To refill the tank, lay the chain saw on its side and remove the oil tank cap. The proper amount of oil is 140 ml. After refilling the tank, make sure that the oil tank cap is tightened securely. 1 2 ► 1 . Oil tank cap 2. Oil inspection window After refilling, hold the chain saw away from the tree. Start it and wait until lubrication on saw chain is adequate. 1 2 ► 1 . Screw 2. Spike bumper NOTICE: When filling the chain oil for the first time, or refilling the tank after it has been completely emptied, add oil up to the bottom edge of the filler neck. The oil delivery may otherwise be impaired. NOTICE: Use the saw chain oil exclusively for Makita chain saws or equivalent oil available in the market. NOTICE: Never use oil including dust and particles or volatile oil. NOTICE: When pruning trees, use botanical oil. Mineral oil may harm trees. NOTICE: Before the cutting operation, make sure that the provided oil tank cap is screwed in place. 14 ENGLISH