Makita XCU06Z XCU06T Instruction Manual - Page 2
Specifications - chain
View all Makita XCU06Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
ENGLISH (Original instructions) SPECIFICATIONS Model: XCU05 XCU06 Overall length (without guide bar) 256 mm (10-1/8″) Rated voltage D.C. 18 V Net weight 2.8 - 3.3 kg (6.2 - 7.2 lbs) Standard guide bar length 200 mm (8″) 250 mm (10″) Recommended guide with 90PX bar length 200 - 250 mm (8″ - 10") Applicable saw chain type (refer to the table below) 90PX Standard sprocket Number of teeth 6 Pitch 3/8″ Chain speed Chain oil tank volume 0 - 24 m/s (0 - 1,440 m/min) (0 - 4,720 ft/min) 140 cm3 (4.7 fl oz) • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country. • The weight may differ depending on the attachment(s), including the battery cartridge. The light- est and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table. Applicable battery cartridge BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B • Some of the battery cartridges listed above may not be available depending on your region of residence. WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause injury and/or fire. Saw chain, guide bar, and sprocket combination Saw chain type Number of drive links Guide bar Guide bar length Cutting length Part No. Pitch Gauge Sprocket Type Number of teeth Pitch 90PX 33 40 200 mm (8″) 250 mm (10″) 180 mm (7-1/8″) 244 mm (9-5/8″) 161848-6 161846-0 3/8″ 1.1 mm (0.043″) Sprocket nose bar 6 3/8″ 2 ENGLISH