Makita XLC01ZB XLC01 Instruction Manual - Page 7

ASSEMBLY CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Disposing of Dust CAUTION: • Empty the cleaner before it becomes too full, or the suction force weakens. • Be sure to empty out the dust inside the cleaner itself. Failure to do so may cause the sponge filter to be clogged or the motor to be damaged. • Never throw away the dust stopper because it should be used whenever either the dust bag or the paper pack is used. 1 CAUTION: • When closing the front cover, be careful not to pinch your fingers. 1 ► 1 . Dust stopper 2. Pull out both the orange-colored dust stopper and dust bag together at the same time. 1 2 ► 1 . Front cover 2. Button 1. Push the button to open the front cover. Opening it until a click is heard allows a positive stop at that position. ► 1 . Dust stopper 1 2 ► 1 . Front cover 2. Front cover joint NOTE: • The cleaner is constructed in such a way that the front cover comes off when trying to force the front cover open at the angle of more than 90°. If the front cover comes off, insert it into the front cover joint in place. 3. Remove the dust stopper and empty the cleaner. Dust bag and paper pack Install either dust bag or paper pack before using cleaner. Use the dust stopper when installing either dust bag or paper pack. The dust bag can be used repeatedly by cleaning it out. Paper pack is a throw-away type. Throw away the entire paper pack without emptying when it has become full. 7 ENGLISH