Makita XLC01ZB XLC01 Instruction Manual - Page 8
Installing dust bag
View all Makita XLC01ZB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installing dust bag 1 2. There is no distinction between the upper and lower sides of the dust bag. You may insert its protrusion of any side into the lower groove of the dust stopper. 2 ► 1 . Upper side of dust stopper 2. Lower side of dust stopper Use the dust stopper when installing dust bag. Be careful not to take the upper side for the lower side by mistake because they are different each other. 1 3 2 3. Overlap the frame of dust stopper with that of the dust bag. 1 ► 1 . Dust stopper 2. Groove 3. Dust bag 1. Insert the protrusion of the dust bag into the groove in the dust stopper as shown in the figure. ► 1 . Cleaner cavity 4. Place the dust stopper and the dust bag together into the cleaner cavity in the same direction of arrow on the dust stopper. Insert them all the way into the slots in the cleaner cavity. 1 ► 1 . Lower groove 8 ENGLISH