Makita XML02PT XML02 Instruction Manual - Page 11

2 1 1 1. Clamping nut 2. Upper handle 3. Store the grass basket between the handle and the mower body. 1. Grass basket NOTE: When putting the mower in the upright position, do not hold the handle but use the front grip of the mower. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. TROUBLE SHOOTING Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs. State of abnormality Mower does not start. Motor stops running after a little use. Motor does not reach maximum RPM. Cutting tool does not rotate: stop the mower immediately! Abnormal vibration: stop the mower immediately! Probable cause (malfunction) Two battery cartridges are not installed. Battery problem (under voltage) The lock key is not inserted. Battery's charge level is low. Cutting height is too low. Battery cartridge is installed improperly. Battery power is dropping. The drive system does not work correctly. Foreign object such as a branch is jammed near the blade. The drive system does not work correctly. Blade is imbalanced, excessively or unevenly worn. Remedy Install the charged battery cartridges. Recharge the battery cartridge. If recharging is not effective, replace battery cartridge. Insert the lock key. Recharge the battery cartridge. If recharging is not effective, replace battery cartridge. Raise the cutting height. Install the battery cartridge as described in this manual. Recharge the battery cartridge. If recharging is not effective, replace battery cartridge. Ask your local authorized service center for repair. Remove the foreign object. Ask your local authorized service center for repair. Replace the blade. 11 ENGLISH