Makita XML02PT XML02 Instruction Manual - Page 7
Assembly
View all Makita XML02PT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1 1. Mowing height adjusting lever NOTE: The mowing height figures should be used just as a guideline. Depending on the conditions of the lawn or the ground, the actual lawn height may become slightly different from the set height. NOTE: Try a test mowing of grass in a less conspicuous place to get your desired height. Grass level indicator ASSEMBLY WARNING: Always be sure that the lock key and battery cartridge are removed before carrying out any work on the mower. Failure to remove the lock key and the battery cartridge may result in serious personal injury from accidental start-up. WARNING: Never start the mower unless it is completely assembled. Operation of the tools in a partially assembled state may result in serious personal injury from accidental start-up. Installing the battery cover WARNING: Do not insert the lock key and battery cartridge before installing the battery cover. Failure to do so may cause a serious injury. Install the battery cover completely before the operation. The battery cover protects the mower and battery cartridge from mud, dirt, and water. 1. Place the battery cover with the protrusions on the mower aligned to the holes on the battery cover. 2 3 1 1 1. Grass level indicator Grass level indicator shows the volume of mowed grass. • When the grass basket is not full, the indicator floats during mowing. • When the grass basket is full, the indicator does not float during mowing. In this case, stop mowing immediately and empty the basket. After emptying the basket, clean it so that its meshwork vents the air. NOTE: This indicator is a rough guide. Depending on the conditions of inside of the basket, this indicator may not work properly. 1. Protrusion 2. Hole 3. Battery cover 2. Place your hands in the middle of the battery cover and push it. 3. Before the first operation, check that the pivot point of the battery cover is attached properly. If the battery cover is installed correctly, it will not open until the battery cover locking lever is pulled. 7 ENGLISH