Makita XSH08Z XSH08 Instruction Manual - Page 8
Indicating the remaining battery, capacity, Switch action
View all Makita XSH08Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Indicating the remaining battery capacity 1 2 Indicator lamps Remaining capacity Lighted Off Blinking 75% to 100% 50% to 75% 25% to 50% 1 ► 1 . Battery indicator 2. Check button Press the check button to indicate the remaining battery capacities. The battery indicators correspond to each battery. Battery indicator status On Off Blinking Remaining battery capacity 50% to 100% 20% to 50% 0% to 20% Charge the battery Indicating the remaining battery capacity Only for battery cartridges with the indicator 0% to 25% Charge the battery. The battery may have malfunctioned. NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. Switch action WARNING: Before installing the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. WARNING: NEVER defeat the lock-off button by taping down or some other means. A switch with a negated lock-off button may result in unintentional operation and serious personal injury. WARNING: NEVER use the tool if it runs when you simply pull the switch trigger without pressing the lock-off button. A switch in need of repair may result in unintentional operation and serious personal injury. Return tool to a Makita service center for proper repairs BEFORE further usage. To prevent the switch trigger from being accidentally pulled, a lockoff button is provided. To start the tool, depress the lock-off button and pull the switch trigger. Release the switch trigger to stop. 1 2 1 2 ► 1 . Indicator lamps 2. Check button ► 1 . Switch trigger 2. Lock-off button Press the check button on the battery cartridge to indicate the remaining battery capacity. The indicator lamps light up for a few seconds. NOTICE: Do not pull the switch trigger hard without pressing in the lock-off button. This can cause switch breakage. 8 ENGLISH