Makita XSH08Z XSH08 Instruction Manual - Page 9

CAUTION: The tool starts to brake the circular saw blade rotation immediately after you 1 release the switch trigger. Hold the tool firmly to respond the reaction of the brake when releasing the switch trigger. Sudden reaction can drop the tool off your hand and can cause a personal injury. Automatic speed change function This tool has "high speed mode" and "high torque mode". The tool automatically changes the operation mode depending on the work load. When the work load is low, the tool will run in the "high speed mode" for quicker cutting operation. When the work load is high, the tool will run in the "high torque mode" for powerful cutting operation. ► 1 . Lever Bevel cutting CAUTION: After adjusting the bevel angle, always tighten the clamping screws securely. 1 Loosen the clamping screws. Set for the desired angle by tilting accordingly, then tighten the clamping screws securely. ► 1 . Mode indicator The mode indicator lights up in green when the tool is running in "high torque mode". If the tool is operated with excessive load, the mode indicator will blink in green. The mode indicator stops blinking and then lights up or turns off if you reduce the load on the tool. Mode indicator status On Off Blinking Operation mode High speed mode High torque mode Overload alert Adjusting depth of cut 1 ► 1 . Clamping screw Use the stopper when you do precise 45° angle cutting. Fully turn the stopper as illustrated depending on 0° 45° bevel cut or 0° - 48° bevel cut. 0˃
- 45˃ 1 CAUTION: After adjusting the depth of cut, always tighten the lever securely. Loosen the lever on the depth guide and move the base up or down. At the desired depth of cut, secure the base by tightening the lever. For cleaner, safer cuts, set cut depth so that no more than one blade tooth projects below workpiece. Using proper cut depth helps to reduce potential for dangerous KICKBACKS which can cause personal injury. 0˃
- 48˃ ► 1 . Stopper 9 ENGLISH