Makita XSR01PT XSR01 Instruction Manual - Page 12

Adjusting 0°-cut accuracy This adjustment has been made at the factory. But if it is off, you can adjust it as the following procedure. 1. Slightly loosen the lever on on the bevel scale plate. 2. Make the base perpendicular to the blade using a triangular rule or square rule by turning the adjusting bolt. 1 Rip fence (Guide rule) Optional accessory The handy rip fence allows you to do extra-accurate straight cuts. Simply slide the rip fence up snugly against the side of the workpiece and secure it in position with the clamping screw on the front of the base. It also makes repeated cuts of uniform width possible. 2 2 ► 1 . Triangular rule 2. Adjusting bolt 3. Tighten the lever and then make a test cut to check the verticalness. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 1 ► 1 . Rip fence (Guide rule) 2. Clamping screw MAINTENANCE CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. CAUTION: Clean out the upper and lower guards to ensure there is no accumulated sawdust which may impede the operation of the lower guarding system. A dirty guarding system may limit the proper operation which could result in serious personal injury. The most effective way to accomplish this cleaning is with compressed air. If the dust is being blown out of the guards be sure the proper eye and breathing protection is used. NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. • Circular saw blade • Wrench • Rip fence (Guide rule) • Makita genuine battery and charger NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from country to country. 12 ENGLISH