Marantz CC4003 CC4003 User Manual - English - Page 8
Basic Connections
View all Marantz CC4003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
NAMES AND FUNCTIONS BASIC CONNECTIONS BASIC OPERATIONS ADVANCED CONNECTIONS ENGLISH NAMES AND FUNCTIONS REAR PANEL REMOTE CONTROL EXTERNAL INTERNAL RS-232C IN OUT ANALOG OUT DIGITAL OUT FLASHER IN L R COAXIAL OPTICAL BASIC CONNECTIONS CONNECTING TO AN AMPLIFIER CONNECTING THE POWER SUPPLY AC IN REMOTE CONTROL EXTERNAL INTERNAL RS-232C IN OUT ANALOG OUT DIGITAL OUT FLASHER IN L R COAXIAL OPTICAL 1. Plug the power cord into AC IN jack on the rear panel. AC IN MODEL NO. CC4003 qw er tyu i q EXTERNAL/INTERNAL switch The switch is set to INTERNAL, when first purchased, enabling the unit's built-in signal reception window to be used. Before using the supplied connecting cable to make the connection between the unit and the remote control connectors on a Marantz equipment, set the switch to EXTERNAL. Note Signals cannot be received from the remote controller if the switch is kept at EXTERNAL when the unit is to be used on its own. w RS-232C connector A control port for professionals (custom installers). e REMOTE CONTROL IN and OUT connectors Using the supplied remote control connecting cable, these connectors enable this unit to be connected to a Marantz component equipped with remote control connectors. These connections make it possible to control an entire system that centers on the amplifier or other such component. t DIGITAL AUDIO OUT COAXIAL connector The music signals during play are output digitally from this coaxial output connector. y DIGITAL AUDIO OUT OPTICAL connector The music signals during play are output digitally from this optical output connector. u FLASHER IN connector A control port for professionals (custom installers). This is used to control the unit from other rooms using keypad, etc. i Power cord connector socket Use the supplied power cord to connect to a standard household power supply outlet. Connect the unit so that the power cord can be removed easily as a precaution against possible accidents. r ANALOG OUT connectors The music signals during play are output from these connectors. (Red) (White) Audio connecting cable (supplied) To the CD input connectors Amplifier Notes • Do not connect this unit and other components to mains power until all connections between components have been completed. • Insert all plugs and connectors securely. Incomplete connections may make noise. • Be sure to connect the left and right channels properly. • Be sure to connect input and output properly. • Refer to the instructions for each component that is connected to this unit. • Do not bind audio/video connection cables with power cord and speaker cables this will result in generating a hum or other noise. • Do not connect the unit to the PHONO input connectors on the amplifier. 2. Plug the power cord into an AC outlet. 3. Turn on the power switch of the audio unit (amplifier, etc.) that is connected with this unit. Set the selector on the connected unit to this unit. ADVANCED OPERATIONS TROUBLESHOOTING OTHERS 6