Marantz CD5004 CD5004 User Manual - English - Page 19

ENGLISH Symbols used to indicate buttons in this manual Button located on both the main unit and the remote control Button only on the main unit Button only on the remote control BUTTON [BUTTON] 5 CD PLAYER CD5004 STANDBY ON/STANDBY MP3/WMA DISPLAY OFF 12 PHONES LEVEL  3 5 3 1 [NUMBER] (0~9) [MENU] [Q.REPLAY] [8, 9] 2 [6, 7] [ENTER] Performing menu settings Peak (Peak level search) You can avoid distortion and noise in a recording if you adjust the recording level of the cassette deck in relation to the peak volume level on a disc. This unit can detect portions with relatively high volume levels over the entire disc or programmed tracks. 1 Select "Peak" and press [ENTER]. • The "PEAK" indicator on the display lights and the peak level search starts from the first track on a disc. • When the peak level search of the last track is finished, a 6-second segment before and after portions with relatively high volume level is played repeatedly. • Adjust the recording level of the cassette deck during the above 6-second repeated playback. (For further information, refer to the user guide of the cassette deck.) On TTL TRK On PEAK TIME TEXT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 2 Press 2 to stop playback of the peak location. Edit (Edit mode) When you record from CD to tape, you can use this function to divide the tracks and record them on tape side A and tape side B in accordance with the tape length. When recording, 4-second intervals are inserted between the tracks. • You can use the edit mode during program mode and delete program mode. 1 Select "Edit" and press [ENTER]. • The "EDIT" indicator on the display lights and the tracks stored on the disc are recorded on tape side A and tape side B. (Example: Disc containing 28 tracks) Flashes On EDIT 56 13 14 Last track on tape side B Last track on tape side A Recording time of tape In this example, tracks 1 to 15 are recorded on tape side A and tracks 16 to 28 are recorded on side B when a 90-minute cassette tape is used. NOTE There are multiple locations on a disc where the volume level may be high. Therefore, each time you perform the peak level search on the same disc, different high peak levels may be detected. 2 Setting the recording time of a tape. • When [8, 9] or is pressed each time, the display switches the recording time setting to 46, 54, 60, 74, and 90 minutes. • When [6, 7] or is pressed each time, you can change the recording time in 1-minute increments. • You can also use the number buttons to enter the setting time directly. • [Example] To set 46 minutes, press [4] and [6]. NOTE When " " is displayed on the right of the last track on tape side B, tracks following the last track on tape side B are not played. Flashes In this example, tracks after track 17 are not played. 15