Marantz CD5004 CD5004 User Manual - English - Page 20

Getting started Basic connections Basic operation Advanced connections Advanced operations Explanation of terms Troubleshooting Specifications Index ENGLISH Performing menu settings 3 Press [ENTER] to end the setting operation. On On TTL TRK A - EDIT TTL TIME TEXT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Total playing time of side A All tracks to be played on tape side A Total number of tracks on side A NOTE • During edit playback, you can operate only , , and buttons on the main unit. (You cannot use the remote control for operation.) This prevents recording errors due to unintentional operation. • During edit playback, no text information stored on a CD-Text disc is displayed. Only the time is displayed. • With Auto Standby On, you can automatically set this unit to standby mode after the unit is in stop mode continuously for about 30 minutes, during setting in the Edit mode or edit playback. n Edit recording 1 After you finish settings in the edit mode, set the cassette deck to start recording. 2 Press 1 or 3 to play back the tracks on side A. Playback starts after about 4 seconds. • When playback for recording tracks on side A ends, the recording stops temporarily at the beginning of the first track to be recorded on side B. 3 Change the cassette tape to side B and start recording. 4 Press 1 or 3 to play back the tracks on side B. Playback starts after about 4 seconds. • When playback for recording tracks on side B ends, the recording stops and the settings in the edit mode are canceled. You can perform edit recording during the program mode and delete program mode. MP3/WMA Mode (File playback mode setting) You can select the playback mode for MP3/WMA files. 1 Select "MP3/WMA Mode" and press [ENTER]. • The default setting is "Cont. mode". 2 Press [8, 9] or to select the playback mode. Cont. mode: All files on the disc are played. Folder mode: All files in the selected folder are played. • This unit can play MP3 and WMA files. 3 Press [ENTER]. The setting is saved. Digital Out (Digital audio output setting) You can prevent analog audio circuits from being affected by digital audio circuits by turning off the digital audio output. You can use higher quality sound to play back analog sounds. 1 Select "Digital Out" and press [ENTER]. The current settings appear on the display. • Digital output is set to "On" at the factory. 2 Press [8, 9] or to select "On" or "Off". Off: Turns off digital audio output. On: Turns on digital audio output. 3 Press [ENTER]. The setting is saved. Quick Replay (Quick replay playback) Using the quick replay function When you press [Q.REPLAY] during playback, the play position will jump back from the current position for length of time that was set and playback is resumed. NOTE • You cannot cross over from one track to another when you perform the quick replay function. • When you press [Q.REPLAY], if the total length of the track being played or the track elapsed playing time is shorter than the time set for quick replay, the play position will return to the beginning of the track and playback is resumed. Setting the quick replay time If a disc is set in the disc tray, remove the disc and then perform the setting. 1 Select "Quick Replay" and press [ENTER]. The quick replay time current setting appears on the display. • The quick replay time is set to 10 seconds at the factory. 2 Press [8, 9] or to set the desired time (5 - 60 seconds). 3 Press [ENTER]. The setting is saved. Auto Standby (Auto standby mode) With Auto Standby On, you can automatically set this unit to standby mode after the unit is in stop mode continuously for about 30 minutes (no operation). 1 Select "Auto Standby" and press [ENTER]. The Auto Standby mode current setting appears on the display. • Auto Standby mode is set to "OFF" at the factory. 2 Press [8, 9] or to 3 Press [ENTER]. The setting is saved. 16