Marantz NR1501 NR1501 User Manual - English - Page 15

CONNECTIONS FUNCTIONS NAMES AND BASIC BASIC OPERATION ENGLISH BASIC CONNECTIONS CONNECTING HDMI COMPONENTS HDMI JACKS This unit has 4 HDMI inputs and 1 HDMI output. It can send digital video and audio signals from Blu-ray's and other sources directly to a display. It minimizes signal degradation caused by analog conversion so that high quality images can be enjoyed. CONNECTING HDMI COMPONENTS An HDMI cable (sold separately) is used to connect the HDMI jack on the unit with the HDMI jack on the Bluray disc player, TV, projector or other component. To transmit multichannel audio via HDMI, the connected player must support multichannel audio transmission through its HDMI jack. Notes • When the HDMI output is connected to a display monitor that does not support HDCP*, signals are not output. To view images in HDMI, it is necessary to connect to a display that supports HDCP. • Refer to the instruction manual of the TV or display to be connected to the unit for detailed information regarding the HDMI terminal. * HDCP: High-bandwidth Digital Content Protection Blu-ray disc player Satellite tuner Video projector HDMI OUTPUT HDMI OUTPUT HDMI INPUT Notes • Some source devices such as DVD players or set top box do not support HDMI repeater operations like those of the unit. In such case, pictures are not properly projected on monitors such as TVs and projectors. • When multiple components are connected to this unit, turn power to unused components off to prevent interference between them. • Disconnecting or connecting cables with the power on can damage the equipment. Turn the power off before disconnecting or connecting cables. • The following functions are not available when the unit is connected to equipment that does not support HDMI 1.3a. • Deep Color • x.v. Color • Bitstream audio signal decoding, as for Dolby Digital Plus, Dolby TrueHD, DTS-HD, and so on For details, refer to the user's manuals of connected equipment. • Depending on the quiality of the cable used, the HDMI signal may be affected by noise. • The unit does not support HDMI control. However, it can be connected between devices that support HDMI control, and the HDMI control signals can be passed through the unit to exercise the control concerned ("HDMI control through" function).
"HDMI control" is a function that lets one device control another when both feature HDMI CEC (Consumer Electronics Control). By using HDMI cables to connect the devices, linked operations can be performed between them. MONITOR OUT OUT DVD MONITOR OUT BLU-RAY GAME DVD DSS OUT FM (75Ω) GND AM IN DVD IN DSS VIDEO IN VCR L Y PB/CB PR/CR DSS 3 Y PB/CB PR/CR VCR COMPONENT VIDEO 2 PRE OUT R ANTENNA IN DVD IN DSS IN OUT VCR ANALOG AUDIO IN CD 1 IN AUX 2 SUB WOOFER IN OUT REMOTE CONTROL IN DIGITAL AUDIO MODEL NO. NR1501 R - FRONT - L CENTER R - SURR. - L SPEAKER SYSTEMS : 6-8 OHMS R L SURROUND BACK AC IN ADVANCED CONNECTIONS SETUP ADVANCED OPERATION TROUBLESHOOTING OTHERS 11