Marantz NR1501 NR1501 User Manual - English - Page 40
Video
View all Marantz NR1501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
ENGLISH NAMES AND FUNCTIONS CONNECTIONS BASIC OPERATION ADVANCED CONNECTIONS BASIC TROUBLESHOOTING VIDEO Symptom No image on the monitor TV. The audio or the image does not match the selected source. Cannot record to a VCR, etc. The converted video signals are disturbed. Cause • The monitor TV connection, input switching, etc., are not set up correctly. • The unit has an HDMI connection to the source component, but no HDMI connection to the monitor TV. The input cables are not correctly connected. • The video recording component jack does not match the source component jack. • A copy-protected signal is being received. When special playback is performed by the video deck, the conversion may not be carried out normally, causing the video signals to be disturbed and preventing the images from being shown. Solution • See the monitor TV's instruction manual. • Make an HDMI connection to the monitor TV. Connect the cables properly, referring to the connection diagram. • Make sure the recording component jack matches the source component jack. (Video input) • Video signals that include copyprotected signals cannot be recorded. Connect a monitor TV using the same format (video or component) as the source component. Page 11 9, 10, 11 10 10 36 HDMI Symptom Cause Solution The HDMI cable is improperly connected. Check the HDMI cable connection. The unit is connected with a nonspec HDMI cable. Use of a cable no longer than 5 meters is recommended to ensure stable operation, prevent picture degradation, etc. The connection between components over an HDMI connection has not been authenticated. Turn the power on again to all the components on the HDMI connection. Make sure the unit's HDMI settings are correct. There is no picture with the HDMI connection. The HDMI settings are incorrect. Set the unit for HDMI input, as explained in the instruction manual of the video component (TV, projector, etc.). Make settings to enable HDMI output, as explained in the instruction manual of the source device (Blu-ray disc player, Set Top Box, etc.). Match the resolution for both components, as explained in the instruction manual of the component on the HDMI connection. The unit is connected to the video component (TV, projector, etc.) by DVI connector. Connect an HDCP-compatible video component. The power to the unit is turned off. (HDMI connections are not enabled Turn on the main power to the unit. when the unit is in STANDBY mode.) It takes time for the image to be displayed over an HDMI connection. The connection is being Some HDMI components require authenticated between components time for authentication. There is on the HDMI connection. nothing wrong with the unit. Make settings to enable HDMI audio output, as explained in the instruction manual of the source device (Blu-ray disc player, Set Top Box, etc.). There is no audio playback over an HDMI connection. The HDMI settings are incorrect. Set so that the HDMI audio output setting matches the signals supported by the unit, as explained in the instruction manual of the source device (Blu-ray disc player, Set Top Box, etc.). No sound is heard from the unit ON has been set for HDMI AUDIO when ON is set for HDMI AUDIO OUT on the SYSTEM SETUP menu. OUT. Select OFF as this menu item's setting. Page 11 11 − − − 19 − − 12 − 19 − 19 SETUP ADVANCED OPERATION TROUBLESHOOTING OTHERS