Marantz RC3200 RC3200 User Manual - Page 24
Recording Macros, Tap Start.
View all Marantz RC3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Setting Up Your RC3200 6 Tap the soft or hard button you want to select as a macro. A message screen appears instructing you that the RC3200 is now recording the buttons you press as macro steps. 7 Tap Start. The Home Pages appears with the 'Recording' label at the top of the screen. The buttons you tap on this screen will not be recorded. From the Home Pages you can go to the different devices or you can press the Extra hard button to go to the Extra screen with delays and beeps. 8 Tap the button of the device you want to go to. The device screen appears. 9 Tap the soft or hard buttons with the commands you want to record. 10 Press the Page Up and Page Down buttons to go to different screens of the same device. -orPress the Home button to go to the Home Pages again. 11 To add delays and beeps to the macro, press the Extra hard button on the Home Pages. The Extra screen appears. Delays Beeps Use delays to compensate for the dead time when a component first powers up and will not respond to another IR command. Additionally, short .5 second delays make channel macros more reliable. Use beeps to signal that the macro is finished. User Guide To add a delay or a beep, tap the corresponding button. TIP By tapping several Delay buttons, the duration of the delay will be increased. 22