Marantz RX8001 User Guide - Page 13

Specifications - manual

Page 13 highlights

RX8001 User Guide 5 Select the Extender that you want to configure and click on the Configure button. The Configuration Tool opens in the browser. 6 Select Firmware Update in the left navigation pane. The Firmware Update page opens. 7 Follow the onscreen instructions. When you are asked to browse to the update file, you need to select the ZIP file you downloaded earlier from the website. Tip When your Extender is not recognized by the Extender Discovery tool, update the Extender with the crossed Ethernet cable, as described on page 9. ENGLISH Specifications The specifications and design of this product are subject to change without notice. General Modes Dimensions Operating temperature Infrared (IR) Radio Frequency (RF) Dual IR emitters Mono mini-jack cables Power adapter Accessories Dark grey ABS housing with poly carbonate front plate 802.11 b/g compliant RF technology 4 LED indications for Power, WiFi, Network and Busy Up to 16 extenders and 16 control panels in a system (for all modes) 4 addressable outputs for IR emitters Ethernet RJ45 connection Rotatable RF antenna Positioning: freestanding or mounted in any position Stand-alone (wireless): Similar to WiFi ad-hoc mode; no access point and router required Network (wireless): Similar to WiFi infrastructure mode; used in a system with a router and access point Network (wired via Ethernet): used in a system with a router and access point 3,98 x 6,18 x 1,3 inch (101,2 x 157 x 33,5 mm) 32°F to 122°F (0°C to 50°C) IR frequency range: 25kHz-1MHz (including DC/flash codes) IR power out: 2 levels 802.11g at 2.4 GHz with additional proprietary protocol Number of IR emitters: up to 4 (2x2), emitters wired in series 0.13 inch (3.5 mm) mono mini-jack Cable length: 9 ft (2.7 meters) 0.13 inch (3.5 mm) mono mini-jack Cable length: 5 ft (1.5 meters) 100V-240 VAC / 50-60 Hz Power adapter (5 VDC/2A output, UL-CE approved) Warranty certificate (For USA/Canada only) Wireless Extender User Guide © Marantz Brand Company - A division of D&M Holdings Inc. D&M Building, 2 -1 Nisshin-CHO, Kawasaki-KU, KawasakiSHI, Kanagawa, 210-8569, Japan. Remarks: All rights are reserved. Reproduction in whole or in part is prohibited without prior consent of the copyright owner. Marantz Brand Company - A division of D&M Holdings Inc. is not liable for omissions or for technical or editorial errors in this manual or for damages directly or indirectly resulting from the use of the Wireless Extender. The information in this User Guide may be subject to change without prior notice. All brand or product names are trademarks or registered trademarks of their respective companies or organizations. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

ENGLISH
10
RX8001 User Guide
5
Select the Extender that you want to configure and click on the
Configure
button.
The Configuration Tool opens in the browser.
6
Select
Firmware Update
in the left navigation pane.
The Firmware Update page opens.
7
Follow the onscreen instructions.
When you are asked to browse to the update file, you need to select the ZIP file you
downloaded earlier from the website.
Tip
When your Extender is
not recognized by the Extender Discovery
tool, update the Extender
with the crossed Ethernet cable, as described on page 9.
Specifications
The specifications and design of this product are subject to change without notice.
General
Dark grey ABS housing with poly carbonate front plate
802.11 b/g compliant RF technology
4 LED indications for Power, WiFi, Network and Busy
Up to 16 extenders and 16 control panels in a system (for all modes)
4 addressable outputs for IR emitters
Ethernet RJ45 connection
Rotatable RF antenna
Positioning: freestanding or mounted in any position
Modes
Stand-alone (wireless)
: Similar to WiFi ad-hoc mode; no access point and
router required
Network (wireless)
: Similar to WiFi infrastructure mode; used in a system with
a router and access point
Network (wired via Ethernet)
: used in a system with a router and access point
Dimensions
3,98 x 6,18 x 1,3 inch (101,2 x 157 x 33,5 mm)
Operating temperature
32°F to 122°F (0°C to 50°C)
Infrared (IR)
IR frequency range: 25kHz-1MHz (including DC/flash codes)
IR power out: 2 levels
Radio Frequency (RF)
802.11g at 2.4 GHz with additional proprietary protocol
Dual IR emitters
Number of IR emitters: up to 4 (2x2), emitters wired in series
0.13 inch (3.5 mm) mono mini-jack
Cable length: 9 ft (2.7 meters)
Mono mini-jack cables
0.13 inch (3.5 mm) mono mini-jack
Cable length: 5 ft (1.5 meters)
Power adapter
100V-240 VAC / 50-60 Hz Power adapter (5 VDC/2A output, UL-CE approved)
Accessories
Warranty certificate (For USA/Canada only)
Wireless Extender User Guide
© Marantz Brand Company – A division of D&M Holdings Inc. D&M Building, 2 -1 Nisshin-CHO, Kawasaki-KU, Kawasaki-
SHI, Kanagawa, 210-8569, Japan.
Remarks:
All rights are reserved. Reproduction in whole or in part is prohibited without prior consent of the copyright owner.
Marantz Brand Company – A division of D&M Holdings Inc. is not liable for omissions or for technical or editorial errors
in this manual or for damages directly or indirectly resulting from the use of the Wireless Extender.
The information in this User Guide may be subject to change without prior notice. All brand or product names are
trademarks or registered trademarks of their respective companies or organizations.