Marantz SA-11S3 SA11S3U_ENG_UG_v00 - Page 16

ENGLISH Before use nnSetting the playback sound mode in advance (Start sound mode) When purchased, the sound mode setting is "STEREO". The procedure for specifying a different first-priority layer is given below. With no disc in the disc tray, press SOUND MODE, then switch to the desired layer setting. • If a disc that does not contain the layer set for top priority playback is loaded, the contents recorded on another layer are displayed automatically. • This unit memorizes the setting. Even if you open/close the disc tray or turn this unit off and on, the setting remains in effect. • The layer detection order is as follows for discs without an area set for the first-priority layer or discs without any layer. q STEREO w MULTI e CD Playback CDs Playing Super Audio CDs or CDs 1 Press DISC/INPUT to change the input source to "Disc". 2 Insert a disc. • Press OPEN/CLOSE to open and close the disc tray. • You can also close the disc tray by pressing 1, then starts playback automatically. 3 When playing back a Super Audio CD, press SOUND MODE, and select the layer that you want to play back. MULTI CD STEREO 4 Press 1 The 1 display lights, and playback begins. • When all of the tracks recorded on the disc have finished playing back, playback stops automatically. nnStopping Playback Press 2. nnStopping Playback temporarily Press 3. • The 3 indicator lights. • To restart playback, press 1. nnFast-Forwarding and Fast-Reversing (Searching) The search is started by holding down 8, 9 during playback. Normal playback resumes when the button is released. nnMoving to the Beginning of Tracks (Skipping) During playback, press 8 or 9. • The disc is skipped the number of tracks equal to the number of times the button is pressed. • When you press 8 once, playback restarts from the beginning of the current track. nnPlaying a Specific Track (Direct searching) Press NUMBER (0 - 9, +10) to select the track. Example: Track 4 : 4 Example: Track 12 : +10, 2 Example: Track 20 : +10, +10, 0 13