Marantz SA15S2B Instruction Manual - Page 25

BASIC CONNECTIONS NAMES AND FUNCTIONS TROUBLESHOOTING APPLICATION OPERATION ADVANCED CONNECTIONS BASIC OPERATION APPLICATION OPERATION  TO CHECK TRACKS THE PROGRAMMED ENGLISH SEARCHING YOUR FAVORITE TRACKS (AMS (AUTOMATIC MUSIC SCAN) PLAY) CLEAR AMS ¶ To Delete a Programmed Track 1. Press CLEAR button in stop mode when program has been made (When "PROG" indicator is lighting up). 2. Every time press CLEAR button, the programmed tracks are deleted in order from the last track programmed. ¶ To Clear Whole Program Press 7 STOP button two times while in program play. In the stop mode, press 7 STOP button once. Program can also be cleared by pressing 0 OPEN/CLOSE button to open the disc tray. To Add Tracks to Program Tracks can be added to the end of program when program is remaining ("PROG" indicator is lighting up) and in stop mode. ¶ Please be careful about the following matters • When programming 1st through 9th tracks in a disc that has over 10 tracks by using numeric buttons. For instance, programming the 3rd track after programming the 1st track, press 3 button more than approximately 1.5 seconds after 1 button is pressed. When a program is finalized, the time is updated. • Likewise, when programming a track at 10th or after. For example, to program 13th track, press 3 button within approximately 1.5 seconds after 1 button is pressed. • When programming a track in a disc that has less than 9 tracks. For instance, to program the 5th track after 4th track has been programmed, press 5 button more than approximately 0.5 second after 4 button is pressed. This feature is convenient for searching where your favorite track is. If the AMS button is pressed while a track is stopped, the AMS indicator "AMS" lights up, and the first ten seconds of each track on the disc will be played starting from the first track. Also, if the AMS button is pressed during playback, the AMS indicator "AMS" lights up, and the program jumps to the next track after approximately 10 seconds elapses on the display time. Once you find a song that you want to listen to, press the AMS button again or press the 2 button. The AMS indicator "AMS" turns off, and normal playback resumes from the current track. Note: AMS Play cannot be conducted while the unit is in PROGRAM mode. OTHERS 19