Marantz SA15S2B Instruction Manual - Page 28
Filter Selection, Turning Off The Display And, Illumination Display Operation
View all Marantz SA15S2B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
NAMES AND FUNCTIONS BASIC CONNECTIONS BASIC OPERATION ADVANCED CONNECTIONS APPLICATION OPERATION TROUBLESHOOTING ENGLISH APPLICATION OPERATION FILTER SELECTION Filter settings can be adjusted when the unit is in either DAC mode or disc playback mode. Each time the FILTER button is pressed, the filter types cycle from FIL1 → FIL2 → FIL1. The filter setting has a memory retention function so that the setting remains stored and unchanged even when the disc is changed or the power is turned off. Filter settings can be made for either Audio CDs or Super Audio CDs. When in DAC mode or playing back WMA/MP3 discs, set filters as you would for Audio CDs. 7 Filter Selection Table Both Audio CDs and Super Audio CDs have 2 types of builtin filter characteristics, and the quality characteristics differ for each. Please switch them according to your personal preference. Filter type Audio CD Super Audio CD FILTER 1 Faithfully reproduces all audio information. Intimate sound image and positional relationship of audio source are clearly reproduced. (asymmetric slow roll-off filter) (* This is the factory default setting) This is a direct mode that does not perform any filtering of DSD data (the Super Audio CD's recording signal). The original source data is reproduced without any alteration capturing the sound's natural texture and spatial dynamic. (* This is the factory default setting) FILTER 2 Faithfully reproduces all audio information with distinct audio contour. (asymmetric sharp roll-off filter) Faithfully reproduces all audio information. Intimate sound image and positional relationship of audio source are clearly reproduced. Note: The analog output level for each filter changes slightly when playing a Super Audio CD's high-sound-quality stereo area. TURNING OFF THE DISPLAY AND ILLUMINATION (DISPLAY OPERATION) This function is used to turn the LCD and illumination lamps (blue) on and off. (Two display statuses are available) 1. Mode where LCD and illumination lamp (blue) turn on. Each time the DISPLAY button is pressed during playback, the LCD and illumination lamp (blue) switch on and off. When Display Off is set, the Display Off indicator (red) lights up. • When any related button is pressed (such as when the 0 OPEN/CLOSE button, 7 STOP button, or ¢ button is used), the display is automatically turned on, but the Display Off indicator (red) remains lit. If a track is started in this state, the display is automatically turned off two seconds later. • The LCD and illumination lamps (blue) will not turn off even if the DISPLAY button is pressed if the track is stopped. If the Display Off indicator (red) is lit at this time, the display is set to OFF. 2. Setting for turning on only LCD (illumination lamp (blue) remains off). In the default state, the illumination lamp (blue) is lit. In this state, the illumination lamp (blue) remains off regardless of whether the LCD is turned on or off. • Changing procedure (Changes can be made when operation is stopped.) 1. If playback is in progress, press the 7 STOP button to stop playback. To make the setting, hold down the DISPLAY button for at least two seconds from the remote control. 2. If the illumination lamp (blue) is lit, it is turned off and is set off. To change the setting from off to on, hold down the same operation DISPLAY button for at least two seconds to turn on. • The illumination lamp (blue) off setting is retained even when the power is turned off, and this setting remains until the setting is changed to the on setting. • The LCD and illumination lamp (blue) on/off settings are retained even when the power is turned off. OTHERS 22