Marantz SA15S2B Instruction Manual - Page 29
Troubleshooting
View all Marantz SA15S2B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
BASIC CONNECTIONS NAMES AND FUNCTIONS TROUBLESHOOTING APPLICATION OPERATION ADVANCED CONNECTIONS BASIC OPERATION ENGLISH TROUBLESHOOTING If you think that something is wrong with your player, first check the points listed below. Incorrect operations can sometimes be taken for trouble and malfunctions. If the trouble persists even after the following points have been checked, consult your dealer or nearest Marantz sales office or service center. Problem Cause Corrective action The power cord is pulled out of the Insert the power cord plug into the socket. socket. (→ Page 11) Power to this unit is not ON. Turn the power to this unit ON. (→ Page 12) The disc fails to rotate. The disc is not placed in the correct Place the disc in the disc tray correctly. position on the disc tray. (→ Page 12) The disc is placed in upside down. (The disc is placed in with the label Place the disc in the disc tray correctly. facing down). (→ Page 12) The unit is set to DAC mode. Switch the unit to disc mode. (→ Page 21) The disc is dirty. Clean the disc's surface. (→ Page 26) The disc stops rotating in mid- The disc is scratched. operation. The disc is warped. The disc may be unable to be played if it has a lot of scratches. The disc may be unable to be played if it is badly warped. The amplifier and speakers are not Connect the cables correctly. connected correctly. (See the instruction manual for the amplifier.) The amplifier power is not ON. Turn ON the power to the amplifier. (See the instruction manual for the amplifier.) The disc is rotating but no sound is heard. The amplifier's function or selector switch is not set to "CD" or "AUX" or such (to whatever you have connected this unit to). Switch the amplifier's function or selector switch to "CD" or "AUX" or such (to whatever you have connected this unit to). (See the instruction manual for the amplifier.) The amplifier's volume control is set at Adjust the amplifier volume. the minimum level. (See the instruction manual for the amplifier.) The distance between this unit and the Move closer to this unit, and operate the remote remote control is too great. control within the operating range. (→ Page 6) There is an obstacle between this unit and the remote control. Remove the obstacle. (→ Page 6) Remote control operation is not The remote control's batteries are possible. dead. Replace all batteries with new ones. (→ Page 6) A strong light is hitting the unit's sensor Do not let strong light hit the sensor window. window. (→ page 6) The switch on the back of the REMOTE When using this unit independently, set the switch to CONTROL is on EXTERNAL. INTERNAL. (→ Page 15) The disc is placed in upside down. Place the disc in the tray correctly. (→ Page 12) CD-R/CD-RW disc cannot be played. The information recorded is not in an audio (CD-DA) format. Or the specified MP3/WMA file was not properly recorded. Record correct information that is compatible with to this unit. (→ Page 24, 26) OTHERS 23