Marantz SR6300 User Guide - Page 24

ENGLISH CS2 (CIRCLE SURROUND II) PARAMETER 6 CS 2 PARAME T ER T RUBA S S SRS D I A LOG :0 :0 MA I N EX I T 1. Select "CS2" in SETUP MAIN MENU with or cursor button, and press the OK button. 2. To Select desired contents as below, press or cursor button TRUBASS: Set the TRUBASS level between 0 and 6 level in 1 level interval with or cursor button. TRUBASS produced by the speakers to be an octave below the actual physical capabilities of the speakers adding exciting, deeper bass effects. SRS DIALOG: Set the SRS DIALOG level between 0 and 6 level in 1 level interval with or cursor button. This can be popped out of the surround audio effects allowing the listener to easily discern what the actors say. If "NONE" was selected for the Center speaker setting in the Speaker size, then this setting will not appear. If you finish the setup in this menu, move cursor to "MAIN" with or cursor buttons and press OK button. 6.1 CH INPUT LEVEL This sub-menu is to adjust the speaker levels for 6.1-channel input sources. Here you will adjust the volume for each channel so that they are all heard by the listener at the same level. 7 6 . 1 CH I NPUT LEVEL FRONT L CENTER FRONT R SURR . R SURR . C SURR . L SUB W MA I N : 0 dB : 0 dB : 0 dB : 0 dB : 0 dB : 0 dB : 0 dB EX I T 1. Select "6.1CH IN" in SETUP MAIN MENU with or cursor button, and press the OK button. 2. To Select desired channel , press or cursor button. 3. Using the or cursor buttons, adjust the volume level of each channel. 4. If you finish the setup in this menu, move cursor to "MAIN" with or cursor buttons and press OK button. Note: • The condition of these setup will be memorized to 6.1CH INPUT source. 19