Marantz SR6300 User Guide - Page 32
Macro Mode
![]() |
View all Marantz SR6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
ENGLISH Erasing the all functions 1. Press and hold down the T.MODE ⁄1 and MEMO ¤6 buttons until LEARN is displayed in the display. 2. Press and hold down the CL . button and press POWER ON ‹4 and POWER OFF ‹4 button. • A-CLR and LEARN are blinking. 3. Press OK ⁄5 button to continue erasing. • A-CLR is displayed for 3 seconds and the mode returns to LEARN mode. • To cancel the erasing operation, do not press OK button ⁄5 and simply touch any other button. MACRO MODE PROGRAMMING MACROS Macros make it possible to use a single function button to perform more complex series of operations that would normally require pressing several buttons. A single button can be programmed to perform up to 10 steps in sequence. A typical example of such a series might be as follows: • Turn the main amplifier power ON → Switch the function to DVD → Set the Surround Mode to Virtual → Set the DVD player to PLAY. • No signals may be transmitted during macro programming. • The various steps that make up a macro are set initially to be sent one after another in 1 second intervals, however these intervals may be shortened to as little as 0.5 seconds or lengthened to as much as 5 seconds using the Setup mode. • In the macro mode, the number of steps the macro is displayed the following selected function name. • Macros may be programmed for each of the 12 function buttons as follows; TV, DVD, VCR1, DSS, TUNER, CD, CDR, MD, TAPE, AUX1, AUX2, AMP 1. Press and hold the T.MODE ⁄1 and MENU button ¤2 until the MACRO is displayed. • MACRO and LEARN indicators are displayed blinking on the LCD, too. 4. To return the USE mode, press and hold down the OK button ⁄5 until USE is displayed in the display. Note: • Erasing codes will return to the factory preset code, or there will leave empty if the button has no factory preset code. 2. Press the Function button ⁄9 for which you wish to program a series of operations. In this case, let's use the example of the DVD player. Press the DVD Function button ⁄9. The LCD will display DVD-M. Characters displayed on LCD include the following, depending on the function button for which the macro is being programmed: TV-M, DVD-M, VCR-M, DSS-M, TUN-M, CD-M, CDR-M, MD-M, TAP-M, AX1-M, AX2-M, AMP-M • If a macro has already been set for the selected function button, the LCD will blink. 3. Press the buttons for the operations you wish to program as a macro in the sequence you want the macro to program them. For example, press DVD, PLAY. • The number of steps in the macro is displayed on LCD and this number increases by 1 with each button pressed. • Each function button can be programmed to perform up to 10 steps in sequence. 27
![](/manual_guide/products/marantz-sr6300-user-guide-96aa6d0/32.png)