Marantz SR6300 User Guide - Page 31
Learn Mode
![]() |
View all Marantz SR6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
ENGLISH LEARN MODE The remote controller is capable of learning and memorizing the remote control codes used by almost any other remote controller you may already own. • If no commands have been programmed for a particular function button, the remote controller will transmit whatever codes have been factory preset. • The following example shows how to program your remote controller and how to use the codes for a DVD player. LEARNING PROCEDURE 1. Place the remote controller so that its infrared signal transmitter is facing the infrared signal receiver on the Marantz remote controller at a distance of about 5 centimeters. 5 cm ERASING LEARNING CODE Erasing the code by buttons 1. Press and hold down the T.MODE ⁄1 and MEMO ¤6 buttons until LEARN is displayed in the display. 2. Select the function button to select the button to be erased. • Selected function is displayed and LEARN is blinking. 3. Press and hold down the CL button . and press the learned button twice to be erased. • CLR is displayed for 3 seconds and the mode returns to LEARN mode. 2. Press and hold down the T.MODE ⁄1 and MEMO ¤6 buttons until LEARN is displayed in the display. 3. Select the function button to select the function. • Selected function is displayed and LEARN is blinking. 4. Select the button to be learned. • LEARN is displayed. x 2 4. To return the USE mode, press and hold down the OK button ⁄5 until USE is displayed in the display. Erasing the code by functions 1. Press and hold down the T.MODE ⁄1 and MEMO ¤6 buttons until LEARN is displayed in the display. 2. Press and hold down the CL button . and press the learned function button twice to be erased. • F-CLR and LEARN are blinking. 5. Press and hold the button of the original remote controller to learn until OK in the display. • When NG is displayed, repeat this step. • When FULL is displayed, the memory of the RC7300SR is full. If you want to learn the code, you should erase other learned button. 6. 4 5 Repeat steps and to learn other buttons in same function. 7. Repeat steps 3 to 6 to learn other function. 8. When you have finished programming the remote controller, press and hold down the OK button ⁄5 until USE is displayed in the display. x 2 3. Press OK ⁄5 button to continue erasing. • F-CLR is displayed for 3 seconds and the mode returns to LEARN mode. • To cancel the erasing operation, do not press OK button ⁄5 and simply touch any other button. Note: • When NG is displayed in step 5 again, the transmitting code is unavailable for RC7300SR, or the transmitting signal is intercepted by noise. • If no buttons are pressed for approximatelly 1 minutes while in the LEARN mode, the remote controller automatically returns to the use mode. 4. To return the USE mode, press and hold down the OK button ⁄5 until USE is displayed in the display. 26
![](/manual_guide/products/marantz-sr6300-user-guide-96aa6d0/31.png)