Marantz SR8015 Owners Manual English - Page 200

Contents Connections Playback o Low Pass Filter Set the low pass filter cutoff frequency of the LFE signal during IMAX playback. 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 180 Hz / 200 Hz / 250 Hz (Default: 120 Hz) 0 You can set this when "IMAX Audio Settings" is set to "Manual". o Subwoofer Mode Set the bass signal to be played by the subwoofer during IMAX playback. On: Off (Default): The low range signal of all speakers is added to the LFE signal output from the subwoofer. The LFE signal and the bass component of each speaker is played. Only the LFE signal is played. 0 You can set this when "IMAX Audio Settings" is set to "Manual". Settings Tips Appendix o Auro-Matic 3D Preset Selects the Auro-Matic 3D Preset for fine tuning the Auro-3D experience to specific audio material. Small: Medium (Default): Large: Movie: Speech: "Small" is ideal for pop and chamber music. "Medium" is best used on jazz music or typical movies and TV shows. "Large" is ideal for recordings that were recorded in large spaces (e.g. orchestral recording). "Movie" is ideal for experiencing a largecinema effect for watching movies (e.g. action movies with big explosions). "Speech" is ideal for recordings which are mostly dialog (e.g. news broadcast), and that have virtually no inherent spatial information. 0 You can set this when the sound mode is set to Auro-3D. 0 This cannot be set if the input signal contains Auro-3D signals containing a Height channel. Front panel Display Rear panel 200 Remote Index