Marantz SR8015 Owners Manual English - Page 242

Contents Connections Playback Settings Tips Appendix Manual Setup Perform when setting the speakers manually or when changing settings made in Audyssey® Setup. 0 If you enable new speakers in the speaker configuration menu after performing Audyssey® Setup, you will no longer be able to select Audyssey MultEQ® XT32, Audyssey Dynamic EQ® or Audyssey Dynamic Volume®. (v p. 205) 0 Changing the following settings: Speaker size (Large or Small) / Distances / Levels / Crossovers settings will not disable Audyssey® or require running Audyssey® Setup again. 0 "Manual Setup" can be used without changing the settings. Please set if necessary. Amp Assign Select the power amplifier usage method to match your speaker system. o Assign Mode Select how to use the power amp. You need to configure the detailed settings for the speaker configuration in accordance with the selected mode. Select Assign Mode configure the corresponding detailed settings. 13.1ch: 11.1ch: 9.1ch + ZONE2 (Default): 0 Setting to use the 11-channel power amplifier in this unit and an external power amplifier connected to PRE OUT to play back up to 13.1-channels. 0 You can connect speakers for up to 11.1channels for MAIN ZONE. 0 Settings to assign all power amplifier within this unit to MAIN ZONE to play back up to 11.1-channels. 0 Setting to assign the power amplifiers in this unit for ZONE2 to 2-channels. 0 You can connect speakers for up to 9.1channels for MAIN ZONE. Front panel Display Rear panel 242 Remote Index