Marantz SR8015 Owners Manual English - Page 30

Contents Connections Playback Settings Tips Appendix Q1 Q2 Q3 Q4 Q5 Q6 Q7 . K SIGNAL GND terminal Used to connect a ground wire for the turntable. (v p. 94) L DC OUT jacks Used to connect devices equipped with the trigger function. (v p. 102) M FLASHER IN jack Used when using a control BOX or other such control devices to control this unit. N REMOTE CONTROL jacks Used to connect infrared receivers/transmitters in order to operate this unit and external devices from a different room. (v p. 101) O RS-232C connector Used to connect home automation controller devices fitted with RS-232C connectors. Consult the owner's manual of the home automation controller for more information about serial control of this unit. Perform the operation below beforehand. A Turn on the power of this unit. B Turn off the power of this unit from the external controller. C Check that the unit is in the standby mode. P Digital audio connectors (DIGITAL AUDIO) Used to connect devices equipped with digital audio connectors. 0 "Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel) / eARC (Enhanced Audio Return Channel)" (v p. 87) 0 "Connection 3 : TV equipped without an HDMI connector" (v p. 88) 0 "Connecting a set-top box (Satellite tuner/cable TV)" (v p. 90) 0 "Connecting a DVD player or Blu-ray Disc player" (v p. 91) Q Speaker terminals (SPEAKERS) Used to connect speakers. (v p. 45) NOTE 0 Do not touch the inner pins of the connectors on the rear panel. Electrostatic discharge may cause permanent damage to the unit. Front panel Display Rear panel 30 Remote Index