Marantz ST7001 ST7001 User Manual - Page 12

ENGLISH CONNECTIONS CONNECTING THE ANTENNA TERMINALS FM outdoor antenna FM indoor antenna (Supplied) 75 Ω/ohms COAXIAL cable Direction of broadcasting station Use tape or a pin to fasten the tip of the antenna to the wall, a rack, etc. AM loop antenna (Supplied) Ground AM outdoor antenna ANTENNA FM(75Ω) GND AM MODEL NO. ST7001 ANALOG OUT 1 2 L L XM R R RS-232C FLASHER IN REMOTE CONTROL IN OUT EXTERNAL INTERNAL AC IN AC O SWIT 100W 7 AM loop antenna assembly q w e 7 Connecting the antenna wire to the antenna adaptor Loosen the screws and attach the wire terminals, then tighten the screws with a screwdriver. Remove the vinyl tie and take out the connection line. Connect to the AM antenna terminals. r a. With the antenna on top any stable surface. Mount b. With the antenna attached to the wall. Bend in the reverse direction. Installation hole Mount on the wall, etc. 7 Connection of AM antennas 1. Push the lever. 2. Insert the conductor. 3. Return the lever. Notes Connecting an FM outdoor antenna • Keep the antenna away from noise sources (neon signs, busy roads, etc.). • Do not put the antenna close to power lines. Keep it well away from power lines, transformers, etc. • To avoid the risk of lightning and electrical shock, grounding is necessary. Connecting an AM outdoor antenna An outdoor antenna will be more effective if it is stretched horizontally above a window or outside. • Do not remove the AM loop antenna. • To avoid the risk of lightning and electrical shock, grounding is necessary. 8