Marantz VP8600 VP8600 User Manual - Page 26

Maintenance - replacement lamp

Get Marantz VP8600 PDF manuals and user guides View all Marantz VP8600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

ENGLISH MAINTENANCE Lamp Life and Replace Lamp Cleaning the Projector ❖ Lamp Hour Display the lamp life by pressing the INFO. button on the remote controller. Notes: • The maximum life limit of the lamp is 4,000 hours. Although we care very much about quality, the lamp can rarely breaks down if running time exceeds 3,000 hours. Therefore we recommend to replace the lamp if Lamp Hour gets over 3,000 hours. The lamp needs to be replaced with-in the maximum life limit. • This product is checked under strict quality control when it is shipped out form factory. "Lamp Hour" in the menu includes the time for this check. So "Lamp Hour" may not be 0 hours when it is used first time. - When the lamp hour exceeds 3900 hours and the unit is still on, the Warning is displayed on the screen automatically. Cleaning the projector to remove dust and grime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at least an hour before cleaning. Failure to do so could result in a severe burn. 2. Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings on the projector. 3. If a little water gets into the projector interior while cleaning, leave unplugged in a well- ventilated room for several hours before using. 4. If a lot of water gets into the projector interior when cleaning, have the projector serviced. ❖ Cleaning the Lens You can purchase optic lens cleaner from most camera stores. Refer to the following to clean the projector lens. 1. Apply a little optic lens cleaner to a clean soft cloth. (Do not apply the cleaner directly to the lens.) 2. Lightly wipe the lens in a circular motion. Caution: 1. Do not use abrasive cleaners or solvents. 2. To prevent discoloration or fading, avoid getting cleaner on the projector case. To clear the warning, press the EXIT button. When this warning is displayed, contact your nearest Marantz authorized dealer or Service center for a replacement. Do not replace the lamp yoursellf. Replacement Parts When replacement parts are required, be sure to inform a Marantz authorized service center. Use only replacement parts specified by Marantz. Unauthorized substitutions may result in fire, electric shock, or other hazards. And, the warranty may not be guaranteed. ❖ Cleaning the Case Refer to the following to clean the projector case. 1. Wipe off dust with a clean dampened cloth. 2. Moisten the cloth with warm water and mild detergent (such as used to wash dishes), and wipe the case. 3. Rinse all detergent from the cloth and wipe the projector again. Caution: To prevent discoloration or fading of the case, do not use abrasive alcohol-based cleaners. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
21
ENGLISH
MAINTENANCE
❖
Lamp Hour
Display the lamp life by pressing the
INFO
. button on the remote controller.
Notes:
•
The maximum life limit of the lamp is 4,000 hours. Although we care very much about
quality, the lamp can rarely breaks down if running time exceeds 3,000 hours. Therefore
we recommend to replace the lamp if Lamp Hour gets over 3,000 hours. The lamp needs
to be replaced with-in the maximum life limit.
•
This product is checked under strict quality control when it is shipped out form factory.
“
Lamp Hour
”
in the menu includes the time for this check. So
“
Lamp Hour
”
may not be 0
hours when it is used first time.
–
When the lamp hour exceeds 3900 hours and the unit is still on, the Warning is displayed
on the screen automatically.
To clear the warning, press the
EXIT
button.
When this warning is displayed, contact your nearest Marantz authorized dealer or Service
center for a replacement.
Do not replace the lamp yoursellf.
When replacement parts are required, be sure to inform a Marantz authorized service center.
Use only replacement parts specified by Marantz. Unauthorized substitutions may result in fire,
electric shock, or other hazards. And, the warranty may not be guaranteed.
Replacement Parts
Lamp Life and Replace Lamp
Cleaning the projector to remove dust and grime will help ensure trouble-free operation.
Warning:
1.
Be sure to turn off and unplug the projector at least an hour before cleaning. Failure to
do so could result in a severe burn.
2.
Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation
openings on the projector.
3.
If a little water gets into the projector interior while cleaning, leave unplugged in a well-
ventilated room for several hours before using.
4.
If a lot of water gets into the projector interior when cleaning, have the projector
serviced.
❖
Cleaning the Lens
You can purchase optic lens cleaner from most camera stores. Refer to the following to clean
the projector lens.
1.
Apply a little optic lens cleaner to a clean soft cloth. (Do not apply the cleaner directly to
the lens.)
2.
Lightly wipe the lens in a circular motion.
Caution:
1.
Do not use abrasive cleaners or solvents.
2.
To prevent discoloration or fading, avoid getting cleaner on the projector case.
❖
Cleaning the Case
Refer to the following to clean the projector case.
1.
Wipe off dust with a clean dampened cloth.
2.
Moisten the cloth with warm water and mild detergent (such as used to wash dishes), and
wipe the case.
3.
Rinse all detergent from the cloth and wipe the projector again.
Caution:
To prevent discoloration or fading of the case, do not use abrasive alcohol-based cleaners.
Cleaning the Projector