Maytag MDB7949SDZ Use & Care Guide - Page 10

Dishwasher Features

Page 10 highlights

Canceling a Cycle 1. Open the door slightly to stop the cycle. Wait for the spraying action to stop before completely opening the door. 2. Press and hold START/RESUME for 4 seconds. The Cancel/ Drain light will light up. 3. Close the door, and the dishwasher starts a drain cycle (if water remains in bottom of dishwasher). Let the dishwasher drain completely. The Cancel/Drain light turns off after 3 minutes. Changing a Cycle After Dishwasher Is Started You can interrupt a cycle and restart the dishwasher from the beginning using the following procedure. 1. Open the door slightly to stop the cycle. Wait for the spraying action to stop, then open the door completely. 2. Check that detergent dispenser cover is still closed. If cover is open, you will need to refill the detergent dispenser before restarting the new cycle. 3. Press CANCEL/DRAIN to reset the control. 4. Select new cycles and options. 5. Press START/RESUME. Adding a Dish After Dishwasher is Started 1. Open the door slightly to stop the cycle. Wait for the spraying action to stop, then open the door completely. 2. Check whether the detergent dispenser cover is still closed. If it is open, the wash cycle has already started and adding a dish is not recommended. 3. If detergent has not yet been used (detergent dispenser cover is closed), you may add a dish. 4. Press START/RESUME. Dishwasher Features Your Maytag dishwasher may have some or all of these features. Silverware basket Use suggested loading patterns, as shown, to better clean the silverware. Cup Shelf Fold down the extra shelf on the lefthand or right-hand side of the top rack to hold additional cups, stemware, or long items such as utensils and spatulas. 10-place loading pattern Use the slots in the cover to keep the silverware separated for optimum wash. If the silverware does not fit into the designated slots, slide the covers outward to remove them and mix silverware types to keep them separated. Load knives down, forks up, and alternate spoons for best cleaning results. Folding Tines (on some models) The Folding Tines located in the back left corner (lower rack) provide convenient loading space for large, bulky items such as pots, pans, and mixing bowls. To lower the tines: Gently push the tines out of each holder toward the center and lay the tines down. Adjustable Upper Racks (on some models) The Adjustable Upper Rack can be raised or lowered to accommodate taller plates, platters, pots, or pans in the upper or lower racks. Full size dinner plates can be loaded in the upper rack if it is in the lower position. NOTE: Always unload racks before adjusting. To raise the rack, press both rack adjusters and lift the rack until it is in the up position and level. To lower the rack, press both rack adjusters and slide the rack back to its lower position. After adjusting the upper rack, check that all spray arms turn freely. Stack-Rack Shelves (on some models) Increase loading flexibility - items such as casserole dishes stay stable while the folding shelf allows you to load smaller items on top. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

10
Canceling a Cycle
1.
Open the door slightly to stop the cycle. Wait for the spraying
action to stop before completely opening the door.
2.
Press and hold START/RESUME for 4 seconds. The Cancel/
Drain light will light up.
3.
Close the door, and the dishwasher starts a drain cycle (if
water remains in bottom of dishwasher). Let the dishwasher
drain completely. The Cancel/Drain light turns off after
3 minutes.
Changing a Cycle After Dishwasher Is Started
You can interrupt a cycle and restart the dishwasher from the
beginning using the following procedure.
1.
Open the door slightly to stop the cycle. Wait for the spraying
action to stop, then open the door completely.
2.
Check that detergent dispenser cover is still closed. If cover
is open, you will need to refill the detergent dispenser before
restarting the new cycle.
3.
Press CANCEL/DRAIN to reset the control.
4.
Select new cycles and options.
5.
Press START/RESUME.
Adding a Dish After Dishwasher is Started
1.
Open the door slightly to stop the cycle. Wait for the spraying
action to stop, then open the door completely.
2.
Check whether the detergent dispenser cover is still closed.
If it is open, the wash cycle has already started and adding a
dish is not recommended.
3.
If detergent has not yet been used (detergent dispenser cover
is closed), you may add a dish.
4.
Press START/RESUME.
Dishwasher Features
Your Maytag dishwasher may have some or all of these features.
Silverware basket
Use suggested loading patterns, as shown, to better clean
the silverware.
10-place loading pattern
Use the slots in the cover to keep the silverware separated for
optimum wash.
If the silverware does not fit into the designated slots, slide the
covers outward to remove them and mix silverware types to keep
them separated.
Load knives down, forks up, and alternate spoons for best
cleaning results.
Folding Tines (on some models)
The Folding Tines located in
the back left corner (lower rack)
provide convenient loading
space for large, bulky items such
as pots, pans, and mixing bowls.
To lower the tines:
Gently push the tines out of each
holder toward the center and lay
the tines down.
Stack-Rack Shelves (on some models)
Increase loading flexibility - items
such as casserole dishes stay
stable while the folding shelf
allows you to load smaller items
on top.
Cup Shelf
Fold down the extra shelf on the left-
hand or right-hand side of the top rack to
hold additional cups, stemware, or long
items such as utensils and spatulas.
Adjustable Upper Racks (on some models)
The Adjustable Upper Rack can be raised or lowered to
accommodate taller plates, platters, pots, or pans in the upper
or lower racks. Full size dinner plates can be loaded in the upper
rack if it is in the lower position.
NOTE:
Always unload racks before adjusting.
To raise the rack, press
both rack adjusters and
lift the rack until it is in
the up position and level.
To lower the rack, press
both rack adjusters and
slide the rack back to its
lower position.
After adjusting the upper
rack, check that all spray
arms turn freely.