Maytag MDB9601AWS Use and Care Manual - Page 15
Sanitized light does
View all Maytag MDB9601AWS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Troubleshooting PROBLEM SOLUTION Items not properly dried/ moisture is present on the dishwasher interior after the dry cycle • Be sure Heated Dry is selected. • Water droplets may form on the inner door as part of the drying process. • Use a rinse aid separate from the detergent like Jet Dry* or Cascade Rinse Aid* regularly, to improve drying. Turn the rinse aid selector toward the MAX setting. • Check water temperature (pg. 6). • Select Sanitize (select models). • Increase detergent amount to match water hardness (pg. 6). • Load properly. (pg. 2-5) • Plastic and items with non-stick surfaces are difficult to dry because they have a porous surface which tends to collect water droplets. Towel drying may be necessary. • Glasses and cups with concave bottoms hold water and require towel drying. Locate these items on the more slanted side of the rack for improved results. Dishware is chipped • Load dishes according to instructions so they do not strike each other (pg. 2-5). • Washing fine antique china/crystal in the dishwasher is not recommended. • Do not load glasses over the tines. • Do not overload. Sanitized light does not illuminate at the end of the cycle (select models) • Sanitize was not selected. • Sanitization can only be achieved with the Auto Clean (select models), Heavy Wash, Normal Wash or Light Wash cycles. • Sanitization may not be achieved if there is an interruption of the cycle, power failure or if incoming water temperature is below 120° F (49° C). Dishwasher door will not close • Be sure adjustable racks (select models) are properly adjusted to upper or lower position (pg. 5). *Brand names are trademarks of the respective manufacturer. 14