Maytag MED8200FC Installation Guide - Page 20
Rotate and reassemble outer window, assembly to trim ring, Remove hinge and latch, Reverse outer
View all Maytag MED8200FC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
5. Reverse outer window assembly Handle 6. Rotate and reassemble outer window assembly to trim ring Bottom of door Notches Fig. A Fig. A Handle Fig. B Using a Phillips screwdriver, remove the 4 screws from the outer window retainer and lift off the trim ring off the window (A). Rotate trim ring 180° and secure with the 4 screws removed earlier (B). Fig. B With the edge with 2 notches at the top, align the notches on the outer window assembly with the tabs on the trim ring and lower into place as shown in figure A. Rotate the outer window assembly counterclockwise to lock tabs into place (figure B). Using a Phillips screwdriver, secure with 2 screws removed earlier. IMPORTANT: Do not overtighten. 7. Remove hinge and latch Latch Hinge Using a T25® screwdriver, remove the 3 screws securing the latch plate and latch backing plate and the 5 screws holding the hinge assembly in place. 20