Maytag MED8200FC Installation Guide - Page 22
Remove inner door from outer door, Remove hinge and latch, Reinstall hinge and latch, on opposite
![]() |
View all Maytag MED8200FC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2. Move the door strike 4. Remove hinge and latch Latch Using a T25® screwdriver, remove the 2 screws securing the door strike to the door frame of the dryer. Rotate the strike 180° and attach to the opposite side of dryer door frame as shown. 3. Remove inner door from outer door Hinge Using a T25® screwdriver, remove the 3 screws securing the latch plate and latch backing plate and the 5 screws holding the hinge assembly in place. 5. Reinstall hinge and latch on opposite sides Position the door with the inside of the door facing up. Using a Phillips screwdriver, remove the 10 screws securing the inner door to the outer door. Lift off the inner door and set aside. Using a T25® screwdriver, reinstall the latch plate and latch backing plate with the 3 TORX® screws removed earlier and the hinge assembly with the 5 screws on the opposite sides from which they were removed. 22
![](/manual_guide/products/maytag-med8200fc-installation-guide-1a65680/22.png)