Maytag MEDB755DW Installation Guide - Page 6

Back View 4" (101 mm) 301/4" (768 mm) 11/4" (32 mm) 11/4" (32 mm) 43/4" 141/2" (121 mm) (368 mm) 91/4" (235 mm) Steam 43/4" 141/2" (121 mm) (368 mm) 91/4" (235 mm) Non-Steam Installation spacing for recessed area or closet The dimensions shown are for the minimum spacing allowed. ■■ Additional spacing should be considered for ease of installation and servicing. ■■ Additional clearances might be required for wall, door, and floor moldings. ■■ Additional spacing of 1" (25 mm) on all sides of the dryer is recommended to reduce noise transfer. ■■ For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilation openings are acceptable. ■■ Companion appliance spacing should also be considered. Installation Spacing 14" max (356 mm) 18"/18" (457 mm/ 457 mm) 3"/3" (76 mm/ 76mm) 48"2/48"2 (310 cm2/ 310 cm2) 6"/0" (152 mm/ 0 mm) 1"/0" (25 mm/0 mm) 3"/3" (76 mm/ 76mm) 24"2/24"2 (155 cm2/ 155 cm2) 1"/1" (25 mm/25 mm) Recommended/Minimum spacing Mobile home - Additional installation requirements This dryer is suitable for mobile home installations. The installation must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280) or the Canadian Manufactured Home Standard CAN/CSA-Z240 MH. ■■ Metal exhaust system hardware, available for purchase. For further information, please reference the "Assistance or Service" section of the "Use and Care Guide." ■■ Special provisions must be made in mobile homes to introduce outside air into the dryer. The opening (such as a nearby window) should be at least twice as large as the dryer exhaust opening. For gas dryers mobile home installations: ■■ Mobile Home Installation Hold-down Kit Part Number W10432680 is available to order. For further information, see "Assistance or Service" section in your "Use and Care Guide." 6