Maytag MEDB955F Installation Instructions - Page 23
Reinstall Hinges On Door
View all Maytag MEDB955F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
7. Using a #2 Phillips screwdriver, remove the screws from the opposite side and set them aside. Then, using a plastic putty knife, remove the door latch from the top of the door by gently pushing in the metal tab and lifting. Repeat for the top and remove the latch. A REINSTALL HINGES ON DOOR 1. Using the screws you set aside, reinstall hinge B (removed from the lower-left corner of the door) in the upper-right corner. Tighten all screws. 2. Using the screws you set aside, reinstall hinge A (removed from the upper-left corner of the door) in the lower-right corner. Tighten all screws. A B A A After removing the door latch, move it to the opposite side, place it in the open slot and B press it until the metal tabs click into place. Replace the screws you removed. Door Latch Detail Metal Tab 23