Maytag MEDX700XL Installation Instructions - Page 19

Reverse Door Swing (Models with side-swing doors with glass) 1. Place towel on dryer 4. Remove screws from hinges Place towel on top of dryer to avoid damaging the surface. 2. Remove bottom screws Remove screws attaching hinges to door. 5. Flip door over Flip door over so handle side is down. 6. Remove screws from door Open dryer door. Remove bottom screws from dryer cabinet side of hinges. Loosen (do not remove) top screws from dryer cabinet side of hinges. 3. Lift door off top screws Remove screws at top, bottom, and side of door (4 screws). Keep door screws separate from hinge screws as they are different sizes. 7. Separate inner from outer door Lift door until top screws in dryer cabinet are in large part of hinge slot. Pull door forward off screws. Set door (handle side up) on top of dryer. Remove top screws from dryer cabinet. Holding door over towel on dryer, pry inner door and lift to separate it from outer door. NOTE: Do not pull on door seal or plastic door catches. 19