Maytag MEDZ600TB Use and Care Guide - Page 11
withthedryer
UPC - 883049064925
View all Maytag MEDZ600TB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Pupt owesrupplcyordthrougthhestrainreliefB. esurethathewireinsulatioonnthe powesrupplcyordisinsidtehestrainreliefT. hestrainreliesf houldhaveatighftit withthedryecr abineatndbeinahorizontpaol sitionD.onotfurthetrightesntrain reliesf crewastthispoint. • Put direct wire cable through the strain relief. ]he strain relief should have a tight fit with the dryer cabinet and be in a horizontal position. ]ighten strain relief screw against the direct wire cable. Style 2: Direct wire strain relief • Unscrew tile rer'nowtble conduit connector and any screws from a 3/4" (1.9 cm) U[. listed strain relief (UI. marking on strain relief). Put the threaded section of the strain relief through the hole below the terminal block opening. Reaching inside the terminal block opening, screw the removable conduit connector onto the strain relief threads. A B C A. Removable conduit connector B. Hol_' below terminal block opening C. Strain relief thr_'ad_ Now complete installation following 4-wire (recommended) 3-wire (if 4-wire is not available) instructions for your type of electrical connection: Electrical Connection Options If your home has: 4-wire receptacle (NEMA Type 14-_0R) (_ 4-wire direct And you will be connecting to: A U[ listed, 120/240volt minimum, supply cord* 30-amp, dryer power A fused disconnect or Go to Section 4-wire connection: Power supply cord 4-wire connection: (12.7 era) 3-wire receptacle (NEMA type 10-30R) © circuit breaker box* A U[. listed, 120/240volt minimum, 30-amp, dryer power supply cord* Direct Wire 3-wire connection: Power supply cord 3-wire direct A fused disconnect or 3-wire connection: __ " (8.9cm)" circuit breaker box* Direct Wire *If local codes do not permit the connection of a cabinet-ground wire, go to "Optional 3-wire connection" section. conductor to the neutral